ASCE (2017a) Minimum Design Loads and
Associated Criteria for Buildings and Other
Structures: ASCE/SEI 7-16. In: Reston, Virginia:
Published by American Society of Civil Engineers.
2. EuroCode (2004) Design of structures for earthquake
resistance - Part 1: General rules, seismic
actions and rules for buildings. EuroCode 8, 3,
229p., BSI Standards Publication.
3. Christenson, R.E., Spencer, Jr., B.F., Hori, N., and
Seto, K. (2003) Coupled building control using
acceleration feedback. Computer-Aided Civil
and Infrastructure Engineering, 18(1), 4-18,
doi:http://dx.doi.org/10.1111/1467-8667.00295.
4. Yuji, K., Keizo, N., Masanori, I., Tamotsu, M., and
Hirofumi, S. (2004) Development of connecting
type actively controlled vibration control devices
and application to high-rise triple buildings. Engineering Review, 37(1)
5. Ziyaeifar, M. (2002) Mass Isolation, concept and
techniques. European Earthquake Engineering,
2(1), 43-55.
6. Ziyaeifar, M., Gidfar, S., and Nekooei, M. (2012)
A model for mass isolation study in seismic
design of structures. Structural Control and
Health Monitoring, 19(6), 627-645, doi:http://
dx.doi.org/10.1002/stc.459.
7. ATC-33 (1997) NEHRP Guidelines for the
Seismic Rehabilitation of Buildings (FEMA 273).
Applied Technology Council (ATC-33 Project),
Washington, D.C., Federal Emergency Management
Agency.
8. FEMA (2000) Prestandard and Commentary for
the Seismic Rehabilitation of Buildings (FEMA
356), In Washington, D.C., Federal Emergency
Management Agency.
9. BHRC (2014) Iranian Code of Practice for
Seismic Resistant Design of Buildings, Standard
No. 2800. 4th Ed., Tehran: Road, Housing
and Urban Development Research Center.
10. CSI (July 2015) CSI Analysis Reference
Manual.
11. ASCE (2010) Commentary for Chapters 11-22
(Seismic). Minimum Design Loads for Buildings
and Other Structures.
12. Bernal, D. (1992) Instability of buildings subjected
to earthquakes. Journal of Structural Engineering,
118(8), 2239-2260, doi:http://dx.doi.org/
10.1061/(ASCE)0733-9445(1992)118:8(2239).
13. AISC-ANSI, A. (2010) Specification for
Structural Steel Buildings (ANSI/AISC 360-
10). Chicago (IL), American Institute of Steel
Construction.
14. Bernal, D. (1998) Instability of Buildings during
seismic response. Engineering Structures,
20(4-6), 496-502, doi:http://dx.doi.org/10.1016/
S0141-0296(97)00037-0.
15. Bernal, D., Nasseri, A., and Bulut, Y. (2006)
Instability inducing potential of near fault ground
motions. SMIP06 Seminar Proceedings.
16. Bernal, D. (1987) Amplification factors for
inelastic dynamic P-D effects in earthquake
analysis. Earthquake Engineering and Structural
Dynamics, 15, 635-651.
17. Castilla, E. and Lopez, O. (1980) Influence of
gravity loads in seismic response (in Spanish).
Bol. IMME, 18(67), 3-18.
18. ASCE (2017b) Seismic Evaluation and Retrofit
of Existing Buildings (ASCE/SEI 41-17)
518. doi:10.1061/9780784414859.
19. Dimopoulos, A.I., Bazeos, N., and Beskos, D.E.
(2012) Seismic yield displacements of plane
moment resisting and x-braced steel frames.
Soil Dynamics and Earthquake Engineering,
41, 128-140, doi:http://dx.doi.org/10.1016/
j.soildyn.2012.05.002.
20. ATC (2008) Quantification of Building
Seismic Per formance Factor s - ATC-63
Project Report 90% Drift (FEMA P695). (A.T.
Council Ed.): Federal Emergency Management
Agency.
21. Chopra, A.K. (2007) Dynamics of Structures
Theory and Applications to Ear thquake
Engineering. (3rd Ed.): Pearson Education.
22. COSMOS (2018) Strong Motion Virtual Data
Center . Retrieved from www.strongmotioncenter.
org/vdc/scripts/stnpage.plx?stations=28.
23. PEER (2018) NGA-West2 PEER Ground
Motion DataBase. Retrieved from htpps://
ngawest2.berkeley.edu.