Reliability Analysis of Liquefaction Utilizing Monte Carlo Simulation Based on Simplified Stress Method

Jalal Kasebzadeh, Ali Noorzad, Ahmad Reza Mahboubi

Abstract


Liquefaction analysis is one of the most challenging issues in seismic geotechnical engineering. The unknown factors and pertinent uncertainties involved in the evaluation of liquefaction potential make the problem to be complicated. Liquefaction evaluation include deterministic and probabilistic methods. Deterministic methods are simple but they are not capable to consider the uncertainties. With regard to heterogeneous nature of the soil and probabilistic nature of earthquake loading, it seems that deterministic method is not sufficient for evaluation of liquefaction. Reliability methods are able to capture the uncertainties depending on variability of soil parameters and also to determine the factor of safety proportional to the acceptable risk. In recent years, reliability analysis of liquefaction has been done using approximated method. In the present research, reliability analysis of liquefaction triggering has been discussed using Monte Carlo simulation that is an accurate method. For this purpose, the parameters earthquake magnitude (Mw ), maximum horizontal acceleration (amax /g), total stress (sv ), effective stress (s'v ), fines content percent (FC), and SPT blow count (NSPT) are selected as stochastic parameters and the probability of liquefaction has been estimated. Application of the proposed method to the 233 well-documented case studies verify that deterministic method is not accurate enough to predict the liquefaction and reliability analysis should be used instead. Besides, the sensitivity tests indicate that the SPT blow count is the most influential parameter in liquefaction evaluation and large number of iterations is not required in Monte Carlo Simulation and the results converge after a specific number of iterations.


Keywords


Liquefaction; Monte Carlo simulation; Geotechnical uncertainty; Reliability analysis; Probability of liquefaction

Full Text:

PDF

References


Duncan, J.M. (2000) Factors of safety and reliability in geotechnical engineering. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 126(4), 307-316.

Griffiths, D.V. and Fenton, G.A. (2007) Probabilistic Methods in Geotechnical Engineering. Springer Wien, New York.

Lacasse, S. and Nadim, F. (1996) Uncertainties in characterizing soil properties - plenary paper. Proceedings of ASCE Special Technical Publication No. 58: Uncertainty in the Geologic Environment from Theory to Practice. Madison, Wisconsin, USA, 1, 49-75.

Sowers, G.S. (1991) The human factor in failure. Civil Engineering, ASCE, 61(3), 72-73.

Whitman, V.W. (1996) Organizing and evaluating uncertainty in geotechnical engineering, uncertainty in geologic environment: from theory to practice. Proceedings of Uncertainty'96. Geotechnical Special Publication, ASCE, 58(1), 1-38.

Jha, S. and Suzuki, K. (2009) Reliability analysis of soil liquefaction based on standard penetration test. Computer and Geotechnics, 36, 589-596.

Seed, H.B. and Idriss, I.M. (1971) Simplified procedure for evaluating soil liquefaction potential. Journal of Geotechnical Engineering Division, ASCE, 107(GT2), 1099-1119.

Seed, H.B., Tokimatsu, K., Harder, L.F., and Chung, R.M. (1984) The Influence of SPT Procedure on Soil Liquefaction Resistance Evaluations. Rep. No. UCB/EERC-84/15. Earthquake Engineering. Res Ctr, University of California, Berkeley, California.

Seed, H.B., Tokimatsu, K., Harder, L.F., and Chung, R.M. (1985) Influence of SPT procedures in soil liquefaction resistance evaluations. Journal of Geotechnical Engineering, 111(12), 1425-1445.

Seed, H.B. and De Alba, P.M. (1986) Use of SPT and CPT tests for evaluating the liquefaction resistance of sands. Proc., INSITU'86. ASCE Special Conference on Use of In Situ Testing in Geotechnical Engineering, Special Publication, ASCE, No. 6.

Seed, R.B. and Harder, L.F. (1990) SPT-based analysis of cyclic pore pressure generation and undrained residual strength. Proc., H.B. Seed Memor ial Symp., 2. Bi Tech Publishing, Vancouver, B.C., Canada, 1990; 351-376.

Youd, T.L. and Idriss, I.M. (2001) Liquefaction resistance of soils: summary report from the 1996 NCEER and 1998 NCEER/NSF workshop on evaluation of liquefaction resistance of soils. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 127(4), 297-313.

Cetin, K.O. and Seed, R.B. (2004) Nonlinear shear mass participation factor (rd) for cyclic shear stress ratio evaluation. Soil Dynamics and Earthquake Engineering, Elsevier, 24, 103-113.

Idriss, I.M. and Boulanger, R.W. (2006) Semiempirical procedures for evaluating liquefaction potential during earthquakes. Soil Dynamics and Earthquake Engineering, 26, 115-130.

Idriss, I.M. and Boulanger, R.W. (2008) Soil Liquefaction during Ear thquakes, Monograph MNO-12. Earthquake Engineering Research Institute, Oakland, CA.

Idriss, I.M. and Boulanger, R.W. (2010) SPT Based Liquefaction Triggering Procedures. Report No. UCD/CGM-10/02. Center for Geotechnical Modeling, Department of Civil and Environmental Engineering, University of California at Davis.

Arulndandan, K., Yogachandran, C., Meegoda, N.J., Ying, L., and Zhauji, S. (1986) Comparison of the SPT, CPT, VS and electrical methods of evaluating earthquake induced liquefaction susceptibility in Ying Kou City during the Haicheng earthquake. Geotech. Spec. Publ. No. 6. ASCE, 389-415.

Mitchell, J.K. and Tseng, D.J. (1990) Assessment of liquefaction potential by cone penetration resistance. Proc., H.B. Seed Memorial Symp., 2. BiTech Publishing, Vancouver, B.C., Canada, 335-350.

Robertson, P.K. (1990) Cone penetration testing for evaluating liquefaction potential. Proc., Symp. on Recent Advances in Ear thquake Des. Using Lab. and In Situ Tests. ConeTec Investigations Ltd., Burnaby B.C., Canada.

Juang, C.H. and Chen, C.J. (1999) CPT-based liquefaction evaluation using artificial neural networks. Computer-Aided Civil and Infrastructure Engineering, 14(3), 221-229.

Baziar, M.H. and Nilipour, N. (2003) Evaluation of liquefaction potential using neural-networks and CPT results. Soil Dynamics and Earthquake Engineering, 23(7), 631-636.

Juang, C.H., Yuan, H.M., Lee, D.H., and Lin, P.S. (2003) Simplified cone penetration test-based method for evaluating liquefaction resistance of soils. Journal of Geotechnical and Geoenvironmental Engineering, 129(1), 66-80.

Andrus, R. and Stokoe K.H. (1997) Liquefaction resistance based on shear wave velocity. Proceedings of NCEER Workshop on Evaluation of Liquefaction Resistance of Soils.

Kramer, S.L. (1996) Geotechnical Earthquake Engineering. Prentice Hall.

Johari, A., Javadi, A.A., Makiabadi, M.H., and Khodaparast, A.R. (2012) Reliability assessment of liquefaction potential using the jointly distributed random variables method. Soil Dynamics and Earthquake Engineering, 38, 81-87.

Johari, A. and Khodaparast, A.R. (2013) Modeling of probability liquefaction based on standard penetration test using jointly distributed random variables method. Engineering Geology, 158, 1-14.

Johari, A., Fazeli, A., and Javadi, A.A. (2013) An investigation into application of jointly distributed random variables method in reliability assessment of rock slope stability. Journal of Computers and Geotechnics, 47, 42-47.

Johari, A. and Javadi, A.A. (2012) Reliability assessment of infinite slope stability using the jointly distributed random variables method. Scientia Iranica , 19(3), 423-429.

Hasofer, A.M. and Lind, N.C. (1974) An exact and invariant first-order reliability format. Journal of the Engineering Mechanics, 100(1), 111-121.

Ang, A.S. and Tang A.H. (1984) Probability Concepts in Engineer ing Planning and Design. Inc, New York, Vol. II.

Rosenblueth, E. (1975) Point estimates for probability moments. Proceedings of the National Academy of Sciences, 72(10), 3812-3814.

Haldar, A. and Tang, W.H. (1979) Probabilistic evaluation of liquefaction potential. Journal of the Geotechnical Engineering Division, ASCE, 105(2), 145-163.

Fardis, M.N. and Veneziano, D. (1982) Probabilistic analysis of deposit liquefaction. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 108(3), 395-417.

Chameau, J.L. and Clough, G.W. (1983) Probabilistic pore pressure analysis for seismic loading. Journal of Geotechnical Engineering, ASCE, 109(4), 507-524.

Juang, C.H., Rosowsky, D.V., and Tang, W.H. (1999) Reliability-based method for assessing liquefaction potential of soils. Journal of Geotechnical and Geoenvironmental Engineering, 125(8), 684-689.

Juang, C.H., Yang, S.H., Yuan, H., and Khor, E.H. (2004) Characterization of the uncertainty of the Robertson and Wride model for liquefaction potential evaluation. Soil Dynamics and Earthquake Engineering, 24, 771-780.

Juang C.H., Yang S.H., and Yuan H. (2005) Model uncertainty of shear wave velocity based method for liquefaction potential evaluation. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 131(10), 1274-1282.

Juang, C.H., Fang, S.Y., and Khor, E.H. (2006) First-order reliability method for probabilistic liquefaction triggering analysis using CPT. Journal of Geotechnical and Geoenvironmental Engineering, 132(3), 337-350.

Lee, Y.F., Chi, Y.Y., Lee, D.H., Juang, C.H., and Wu, J.H. (2007) Simplified models for assessing annual liquefaction probability - a case study of the Yuanlin area. Taiwan. Engineering Geology, 90, 71-88.

Lee, Y.F., Chi, Y.Y., Juang, C.H., and Lee, D.H. (2010) Annual probability and return period of soil liquefaction in Yuanlin, Taiwan attributed to Chelungpu Fault and Changhua Fault. Engineering Geology, 114, 343-353.

Jha, S.K. and Suzuki, K. (2009) Liquefaction potential index considering parameter uncertainties. Engineering Geology, 107, 55-60.

Jha, S.K. and Suzuki, K. (2009) Reliability analysis of soil liquefaction based on standard penetration test. Journal of Computers and Geotechnics, 36, 589-596.

Ang, H.S. and Tang, W.H. (2007) Probability Concepts in Engineering: Emphasis on Applications to Civil and Environmental Engineering. 2nd ed, John Wiley and Sons, New York.

Wang, Y. (2012) Uncertain parameter sensitivity in Monte Carlo simulation by sample reassembling. Computers and Geotechnics, 46, 39-47.

Baecher, G.B. and Christian, J.T. (2003) Reliability and Statistics in Geotechnical Engineering. New Jersey: John Wiley and Sons.

Phoon, K.K. (2008) Reliability Based Design in Geotechnical Engineering. Taylor & Francis, USA.

Fenton, G. (1997) Probabilistic methods ingeotechnical engineering. Workshop presented at ASCE GeoLogan'97 Conference, Logan, Utah.


Refbacks

  • There are currently no refbacks.